Gorilla Glue 250ml
Gorilla Glue 250ml is Ireland’s best quality, price and performance heavy duty glue. It is 100% WATERPROOF: Doesn’t break down when exposed to outdoor elements
VERSATILE: Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
Expands 3 times into the materials to form an incredibly strong bondPrepare and Dampen the Surfaces
If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 2 ounces it is best to cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.
Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.
Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
To apply Gorilla Glue 250ml Evenly spread Gorilla Glue Onto the Dry Surface
Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.
It is best f you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. In this instance it will actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. However for best results, allow 24 hours to cure.
We advise if you need to remove any uncured “squeeze out” or wet glue, after that we recommend wiping with a dry cloth or using a standard paint thinner. We advise you make sure to read and follow directions if using a paint thinner, similarly we advise always wear gloves. It is best that once the glue is dry, it is best removed mechanically: We advise to try sanding, chiseling, scraping or picking. Because the dried glue will not damage tools.
We advise after each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing it is better to tightly replace the cap and then store in a cool, dry place. Above all this helps eliminate moisture in the bottle.
TEMPERATURE RESISTANT: Because of it’s great Bond holds through hot and cold temperatures. For instance it would be ideal in cold rooms or similarly it would be ideal in kitchens.
In conclusion if following the steps above you will get the best from the product.