Description & Uses
The Business, is a durable, universal, flexible hybrid sealant and adhesive that sticks and
seals anything to anything – it is quite simply The Business!
For both internal and external use, in all weather conditions, with excellent adhesion even
on wet surfaces. Quick curing, weather resistant, isocyanate, solvent and acid‐free making it
safer to use. Remains fully elastic. Can be overpainted. Rapid curing formula.
Almost any bonding and sealing applications.
Can be applied to: glass, timber, bricks, porcelain, ceramics, polyurethane, GRP,
polystyrene, coated metal, epoxy, PVCu, most plastics and much more.
A nail replacement adhesive.
Suitable for applications in areas where food is being processed and/or stored.
Available in: White, Crystal Clear, Grey and Black in 290ml cartridges (and in White, Grey
and Black in 600ml foils).
Ensure all surfaces are clean, sound, and free from dust, grease or other
contaminants. Old silicone should be removed using a silicone remover.
Cut thread and then the nozzle to the required size. Apply with a sealant gun.
As a Sealant
Apply in a continuous bead along the joint and allow to cure.
Tool down using a spatula wetted with soapy water.
As an Adhesive
Apply in beads or strips and bond the surfaces together carefully and allow to cure.
Note: for bonding heavy items or fixing mirrors, temporary support must be
Remove any excess material and clean tools immediately using white spirit. Once cured can
only be removed mechanically. Hands can be cleaned with Grafters Wipes.
Store in cool, dry conditions, away from direct sunlight. Ideally store between +5°C & +30°C
18 months when stored as directed above and kept in the original, unopened packaging.
If using on overhead applications, recommended to use in conjunction with mechanical fixings.
Not recommended for installations where joints are permanently immersed in water or on
surfaces that bleed oils or plasticisers.
On porous substrates priming is recommended prior to application.
Note: if allowed to cure in dark conditions or poor light the product may yellow.
This product is not for use in aquariums or for continuous exposure to water.
Not suitable for use on PE, PP, PTFE, PC, PMMA, soft plastics, natural stone, mirrors, wax,
neoprene or bituminous surfaces.
Can be overpainted with water based paints when dry, however as quality and type of paint can
vary, always test compatibility before use.
Not suitable for movement and glazing joints.
Trials on a small area are recommended before full scale use.
It is the user’s responsibility to ensure suitability for use.
Read the label prior to use for the essential health and safety information, Safety Data Sheet
available on request.
Hardness Shore A
(DIN 53505 S2) 45 52
Skin Formation (DBTM 16)
(@23°C. 50% RH) 10 mins 10 mins
Curing Time (@23°C. 50% RH) 2‐3mm / 24 hours 2‐3mm / 24 hours
Density (ISO 1183‐1) 1.06g/ml 1.56g/ml
Temperature Resistance ‐40 to +90°C ‐40 to +90°C
Tensile Strength (DIN 53504 S2) 3.20 N/mm² 2.00 N/mm²
100% modulus (DIN 53504 S2) 1.15 N/mm² 1.15 N/mm²
(@ Ø 2.5mm / 6.3 bar) 150‐300g/min 100‐300g/min
Application Temperature +5 to +40°C +5 to +40°C
Elongation at Break
(DIN 53504 S2) 450% 350%
Flow (ISO 7390) <2mm <2mm