Description & Uses
ALPHA GRIP is a high quality, multi-purpose, fast bonding grab adhesive also ideal for gap
filling. This solvent based adhesive is the perfect replacement for mechanical fixings in a
wide variety of applications whether internal or external with excellent creep and slump
resistance. Ideal for fixing skirting boards, wall battens, gripper rods, laminates and much
more, suitable for use on porous and rough substrates.
ALPHA GRIP truly is multi-purpose, working on a wide variety of building materials
including aluminium, brick, steel, stone, concrete, wood, chipboard, plasterboard, tiles,
PVCu cladding and building panels. It can be used in interior and exterior applications.
Ensure all surfaces are clean, sound, dry and free from dust, grease or other
Apply using a standard sealant gun with the nozzle cut at an angle of 45°, and to
an opening slightly larger than the joint to be sealed.
Insert a screw driver into the nozzle to pierce the centre of the membrane.
Apply a 6mm bead (or thicker to suit gap) to one surface, the length of the
material and press onto the second surface applying even pressure. Allow to set.
Excess adhesive should be removed with white spirit.
Temporary support or fixings are recommended on very heavy items whilst
Full strength is achieved in 24-48 hours.
It is the user’s responsibility to dispose of all packaging correctly.
Store in cool, dry conditions below 30° in well ventilated conditions. Store in accordance
with flammable storage regulations.
If spillages occur remove all sources of ignition and ventilate the area – ensure people
are removed from confined areas. Product should be cleaned up immediately with an
inert and absorbent material, i.e. sawdust or sand and collected using non-sparking tools.
12 months when stored in original, unopened packaging.
Not suitable for areas subject to frequent water immersion.
Not recommended for use on asphalt, bitumen or polystyrene.
Not to be used as a mirror adhesive.
Dusty or porous surfaces should be primed prior to application of adhesive.
It is the user’s responsibility to ensure suitability for use.
Read the label carefully for essential health and safety information prior to use.
Please Note – extremely flammable – please refer to SDS for full details