Description & Uses
Cromar AlphaChem Rapid Set Mortar is formulated from
Ordinary Portland Cement and Kiln Dried Silica sand as
well as specially selected additives to make the mortar
workable, fast setting and hard wearing. Initial set occurs
within approximately 10 minutes, dependent on ambient
temperature, final set within 30 minutes. Ready to use just
When mixed together with water it creates the perfect mix
for small repair jobs such as filling holes in brick and block
work and pointing repairs.
Part of the AlphaChem Small Bag range of products – ideal
for small jobs, meaning less wastage. The plastic sealed
bags also mean the product is kept fresher for longer.
Mix contents of bag on a board or in a bucket with
water using a trowel, add water slowly until you
have a consistency you are happy with for the job
you’re doing. Ensure that you use a clean board or
container for mixing.
Be careful not to get your mix too wet!
It is the user’s responsibility to dispose of all
Store indoors in cool, dry conditions between +5 and +25°C in airtight container. Protect from frost.
12 months if stored as directed in original, sealed packaging.
Do not use during freezing conditions.
Do not use in extreme heat (above 30 degrees)
Care must be taken if used in conjunction with ceramics as slight expansion will occur during the
setting process i.e. fixing sanitaryware.
It is the user’s responsibility to ensure suitability for use.
Read the label prior to use it contains essential health and safety information, further
information can be found on the Safety Data Sheet available on request.